Watch: 3D-printed air sac mimics lung and ‘breathes’


A new bioprinting technique clears a major hurdle on path to 3D printing replacement organs.

The innovation allows scientists to create exquisitely entangled vascular networks that mimic the body’s natural passageways for blood, air, lymph, and other vital fluids.

Bioengineers say the advance means they have cleared a major hurdle on the path to 3D printing replacement organs with a breakthrough technique for bioprinting tissues.

The research, featured in Science, includes a proof-of-principle—a hydrogel model of a lung-mimicking air sac in which airways deliver oxygen to surrounding blood vessels. The study also reports experiments to implant bioprinted constructs containing liver cells into mice.

“One of the biggest road blocks to generating functional tissue replacements has been our inability to print the complex vasculature that can supply nutrients to densely populated tissues,” says Jordan Miller, assistant professor of bioengineering at Rice University’s Brown School of Engineering.

“Further, our organs actually contain independent vascular networks—like the airways and blood vessels of the lung or the bile ducts and blood vessels in the liver. These interpenetrating networks are physically and biochemically entangled, and the architecture itself is intimately related to tissue function. Ours is the first bioprinting technology that addresses the challenge of multivascularization in a direct and comprehensive way.”

Daniel Sazer prepares a scale-model of a lung-mimicking air sac for testing. (Credit: Jeff Fitlow/Rice)

“Tissue engineering has struggled with this for a generation,” says Kelly Stevens of the University of Washington. “With this work we can now better ask, ‘If we can print tissues that look and now even breathe more like the healthy tissues in our bodies, will they also then functionally behave more like those tissues?’ This is an important question, because how well a bioprinted tissue functions will affect how successful it will be as a therapy.”

Bioprinting organs

The need for organ transplants is driving the goal of bioprinting healthy, functional organs, researchers say. More than 100,000 people are on transplant waiting lists in the United States alone, and those who do eventually receive donor organs still face a lifetime of immune-suppressing drugs to prevent organ rejection.

Bioprinting has attracted intense interest over the past decade because it could theoretically allow doctors to print replacement organs from a patient’s own cells to address both problems. A ready supply of functional organs could one day treat millions of patients worldwide.

“We envision bioprinting becoming a major component of medicine within the next two decades,” Miller says.

“The liver is especially interesting because it performs a mind-boggling 500 functions, likely second only to the brain,” Stevens says. “The liver’s complexity means there is currently no machine or therapy that can replace all its functions when it fails. Bioprinted human organs might someday supply that therapy.”

To address this challenge, the team created a new open-source bioprinting technology dubbed the “stereolithography apparatus for tissue engineering,” or SLATE. The system uses additive manufacturing to make soft hydrogels one layer at a time.

Layers are printed from a liquid pre-hydrogel solution that becomes a solid when exposed to blue light. A digital light processing projector shines light from below, displaying sequential 2D slices of the structure at high resolution, with pixel sizes ranging from 10-50 microns.

With each layer solidified in turn, an overhead arm raises the growing 3D gel just enough to expose liquid to the next image from the projector. The key insight was the addition of food dyes that absorb blue light. These photoabsorbers confine the solidification to a very fine layer. In this way, the system can produce soft, water-based, biocompatible gels with intricate internal architecture in a matter of minutes.

‘Breathing’ lungs

Tests of the lung-mimicking structure showed that the tissues were sturdy enough to avoid bursting during blood flow and pulsatile “breathing,” a rhythmic intake and outflow of air that simulated the pressures and frequencies of human breathing.

“We never imagined we’d have the opportunity to…design living tissues.”

Tests found that red blood cells could take up oxygen as they flowed through a network of blood vessels surrounding the “breathing” air sac. This movement of oxygen is similar to the gas exchange that occurs in the lung’s alveolar air sacs.

To design the study’s most complicated lung-mimicking structure, Miller collaborated with study coauthors Jessica Rosenkrantz and Jesse Louis-Rosenberg, co-founders of Nervous System.

“When we founded Nervous System it was with the goal of adapting algorithms from nature into new ways to design products,” Rosenkrantz says. “We never imagined we’d have the opportunity to bring that back and design living tissues.”

Living tissue

In the tests of therapeutic implants for liver disease, the team 3D printed tissues, loaded them with primary liver cells and implanted them into mice. The tissues had separate compartments for blood vessels and liver cells and scientists implanted them in mice with chronic liver injury. Tests showed that the liver cells survived the implantation.

The new bioprinting system can also produce intravascular features, like bicuspid valves that allow fluid to flow in only one direction, Miller says. In humans, intravascular valves exist in the heart, leg veins, and complementary networks like the lymphatic system that have no pump to drive flow.

“With the addition of multivascular and intravascular structure, we’re introducing an extensive set of design freedoms for engineering living tissue,” Miller says. “We now have the freedom to build many of the intricate structures found in the body.”

Open source data

Miller and Grigoryan are commercializing key aspects of the research through a Houston-based startup company called Volumetric. The company, which Grigoryan has joined full time, is designing and manufacturing bioprinters and bioinks.

All source data from the experiments in the published study are freely available, Miller says, as are all 3D-printable files needed to build the stereolithography printing apparatus and the design files for printing each of the hydrogels used in the study.

“Making the hydrogel design files available will allow others to explore our efforts here, even if they utilize some future 3D printing technology that doesn’t exist today,” Miller says.

Miller says his lab is already using the new design and bioprinting techniques to explore even more complex structures. “We are only at the beginning of our exploration of the architectures found in the human body. We still have so much more to learn.”

Graduate student Bagrat Grigoryan is lead coauthor of the paper. Additional collaborators are from Rice, the University of Washington, Duke University, Rowan University, and Nervous System.

The Robert J. Kleberg, Jr. and Helen C. Kleberg Foundation, the John H. Tietze Foundation, the National Science Foundation, the National Institutes of Health, and the Gulf Coast Consortia funded the work.

Source: Rice University



Source link

Leave a Reply